- Buyingo
- Sourcing Guides
- Quality Inspection in Turkey: Pre-Production, During Production and Pre-Shipment
How-To
Quality Inspection in Turkey: Pre-Production, During Production and Pre-Shipment
When to inspect, what an inspector checks, how AQL sampling works and how to turn the report into a clear pass or fail decision before goods leave the factory.

What's in this guide?
The most important inspection is the pre-shipment inspection, done when production is complete and most goods are packed. Use a recognised AQL sampling plan, give the inspector a written checklist and the approved sample, and tie the balance payment to a passed result. For first orders or complex products, add an in-line inspection while production is running.
An inspection is your eyes in the factory. It does not make a poor supplier good, but it catches problems while they can still be fixed at the supplier's cost rather than yours.
Three inspection points
Pre-production inspection. Checks raw materials, components and the production plan before work starts. Useful for new suppliers or when material quality is critical.
During production (in-line) inspection. Usually when a portion of the order is complete. Finds systematic problems early, while there is still time to correct the rest of the run.
Pre-shipment inspection. When production is complete and most goods are packed. The inspector draws a random sample, checks it against your specification and approved sample, and reports pass or fail.
How AQL sampling works
AQL (Acceptance Quality Limit) sampling uses statistical tables to decide how many units to inspect and how many defects are acceptable. Defects are typically classified into three levels:
| Defect level | Meaning | Typical tolerance |
|---|---|---|
| Critical | Unsafe or illegal; could harm a user | Usually zero accepted |
| Major | Likely to cause return or complaint | Strict limit |
| Minor | Small deviation, unlikely to cause return | More relaxed limit |
Agree the AQL levels with the supplier before production, so the pass or fail result is not open to debate.
What to give the inspector
- The specification. Materials, dimensions, colours, tolerances and construction details.
- The approved sample or photos of it. The reference everything is measured against.
- A product checklist. What to measure, what to test and what counts as a defect.
- Packaging and labelling requirements. Carton marks, labels, barcodes, care labels, language.
- The quantity and AQL plan. So the sample size and acceptance numbers are clear.
What the inspector checks
- Quantity: finished and packed units against the order
- Workmanship: visible defects, finishing and cleanliness
- Measurements: dimensions, weights, sizes against tolerances
- Function and safety: simple on-site tests relevant to the product
- Packaging and marking: cartons, labels and barcodes
- Photos: a record of what was found
Acting on the report
Pass: release the balance and approve shipment.
Fail: agree a remedy before goods ship. Options include sorting and reworking all goods followed by a re-inspection, replacing defective units, or a negotiated price adjustment. Re-inspection costs are normally borne by the supplier when the first inspection fails.
Make the rules contractual Write the inspection type, AQL levels and the consequence of a failed inspection into the purchase order. Inspections work best when both sides know the rules before production.
Frequently asked questions
Can I inspect goods myself?
Yes, if you or a colleague can travel and know the product well. Independent inspection companies offer neutrality and trained staff, which matters when a result is disputed.
Does an inspection guarantee zero defects?
No. Sampling reduces risk; it does not test every unit. Combine inspection with good specifications and a reliable supplier.
Who pays for the inspection?
The buyer usually pays for the first inspection. If goods fail and need re-inspection, agree that the supplier pays.
Inspect before you pay the balance, use AQL with agreed levels, and give the inspector everything needed to judge. It is one of the best-value costs in sourcing. Back to the complete sourcing guide.
This guide is editorial and independent. Regulations, duties and lead times change; confirm current requirements with official sources before you order. See our verification standards.


